ProfiPrinter72 is a module that connects to the PLC with a serial printer in order to make notes directly on the spot with the date and time.
ProfiPrinter72 is a useful solution for simple recordings that everyone can immediately see.
If you prefer a PC data logging is desired, the data can be read just as well via the serial port of the PC.
ProfiPrinter72 is a complete microprocessor module that is a connection between the PLC and a serial
ProfiPrinter72 has two serial interfaces operating as RS232 or RS485.
ProfiPrinter72 is available for the PLC:
• Moeller Easy 400/600 and 800
• Moeller MFD
• Siemens S7 via MPI – bus
• CAN interface
• RS485 interface
The user software is set to immediate use with a serial printer. The texts are edited with a convenient PC software and loaded into the ProfiPrinter72. This software can be downloaded for free from the Internet. The connection to the specific printer is standardized uniform for plain ASCII text. Graphical representation or special characters can be easily adapted.
ProfiPrinter72 can be used as
• Legal recording
• Data Logger
• Production control
• Operating hours counter
With his hands-hat rail housing it is built very quickly. It is connected to the standard 24V power supply.
12 … 24VDC, + / – 10%, 200mA
Inputs and outputs:
Fujitsu 16-bit Flash controller with 16 MHz clock frequency
100 texts message (optional 400)
0 .. + 50°C
Custom printers adjustments can always be realized
90 × 72 mm DIN-rail