OctoBoost

OctoBoost

Article Number: 

100358

Compact power

- 24 V operating voltage – 2.5 A peak current/output

With new Mos-FET technology was a compact electronics with low heat loss may be created. Unlike relay switching modules play e.g. Arcs of switched inductors not matter. This achieves virtually unlimited service life.

Faster installation

- DIN rail mount – plug-in connection terminals – a common power supply

The input signals are applied directly from the PLC or from the sensor.

For each output terminals are available with two-channel signal and ground available, so that each consumer can be connected separately.

Display and operation

The display elements are self-explanatory. The green LED indicates that the operating voltage was applied. The yellow LEDs indicate the status of the eight outputs, so that a fast friendly service and troubleshooting possible.

Robustness

It was paramount in the development of a point to use any software on any unnecessary addition to waived. In addition, the power semiconductors are oversized so that also cause surges to 60 V does not cause any damage.

The result is a robust electronics, consumers can control the powerful.

Connection Diagram OctoBoost

Technical Data: 

Power supply:
24VDC

Power outlets:
MOS-FET with 2.5A / output

Total current:
12A

Display:
Green LED = Power
8 x LED yellow = on, when output switches off when output blocks

Operating:
0 .. 55 ° C

Storage temperature:
-10 .. + 80°C

Ventilation:
By natural convection

Weight:
160g

Backup:
no

Housing (HxWxD):
100 × 22 × 120mm, DIN-rail

Downloads: